SMART-BUS G4 DYNAMIC DISPLAY PANEL DDP EU WITH LCD - SB-DDP-EU

 

All in one wall Switch, the DDP is an elegant and easy to use wall panel that eliminates wall agony. It has built in thermostat, changeable labels to identify every button use, can control lights, curtains, temperature, music, and TV. DDP has easy fascia color and material changing flexibility to help match any interiors. The DDP has screw less mounting mechanism, security lock, easy upgrade mini-USB, re-locatable IR receiver probe, LED backlit buttons and LCD screen. DDP can accept Multi languages, Icons and Graphics
**Added function: Bigger buttons, Elegant aluminum surround and buttons, mini USB firmware upgrade port, better Temperature sensor, easy connectors. Security lock screw to prevent vandalism.

Control Compatibility:

• Lighting
• Climate
• Music
• Curtains
• Moods
• Media
• Security
• Service
• Color
• Drapes
• Pumps
• Gates




TECHNICAL DATA:

Screen Pages Total 13 pages, (4 flexible use) 7P for HVAC (1 Master+6 Slave) 1P for Music 1P for Floor Heating/Cooling Extra features Lockable keys/ buttons Calibrate able temperature +5- Changeable fascia colors LED backlit buttons and LCD Reloadable IR receiver 15m Screw less mounting Easy sBUS connector tech. Control Applications lighting, HVAC, security, motorized shades, music, moods and scenes, fountains, irrigation, gates, LED color, service request, panic, code entry, lifts, media equipment...etc. User Controls • user control buttons • Diagnostics + BROADCAST Button behavior Single click (on/Off toggle) Double click (mood/Macro) Keep press (dim/ramp) Programming • Manual Pairing to Lighting, HVAC and Audio modules • Advanced Software Configuration & Programming Compliance CE Mark EMC

Total Gangs This DDP is equal to 104 gangs Control IO 1 x Advanced RS485 S-BUS serial port links (both train & screw link types) Upgrade IO 1 x mini USB port (to connect to special programming board) Operation Protection • BUS Rv. Polarity Protection • BUS Short Circuit Protection SBUS DC Supply 24VDC with flexible tolerance between 8-32VDC. Flexible ability to add power supply as to be needed any where Power consumption: 25mA Installation • wall Mount metal frame twist • Magnetic screw less mounting • Advanced security locking • Easy sBUS connector tech. Operating Environment 0º to 45ºC ambient temperature 20% to 93% RH Enclosure material Polycarbonate Dimensions & Weight W85mm x L85mm x H12mm x D8mm. Backed weight 0.22 kg

WHY G4 (GENERATION-4) IS BETTER? DDP, FDP, 6B, 4B, 3B

Switches and wall panels (Features compared)	Old Smart-BUS	New S-BUS G4
Buttons and Surround Finish Material Improvement	Plastic	Aluminum
Glass Material Improvement	Thick & Bulky	I Phone Quality 0.8mm Glass
Back Module Size	Do not Fit all Countries	Fits all countries
Upgrading without opening the Device	Not Possible	By Mini USB
Ability to Snap Connect/Disconnect Cables	Not Possible	Snap In Connector
Ability to Locate IR receiver nearer to user location	Not Possible	Flexible with Snap in Connector
PCB Electronics Design Complexity	2 Complex Boards	Single simple Board
User Graphics Interface	Standard	Improved Icons
Integration to Z-Audio with auto update	Manual	Advanced Auto
Fixed Display Panel (FDP)	Not Available	Available
Easy Backup and Restore using Configuration SW	Not Available	Available
Work on Both BUS and Cloud Technology	Not Possible	Possible
Buttons Size and Workability of Soft switches (1-6 Gang)	Smaller, single side operation	Wider and Bigger with Both sides Operation
Panels Security not to be simple to remove from wall	Not Secure	Secured by Clamps, Magnets, and screw Locks
Metal Plate Twist and Screw Installation Simplicity	Not Possible	Possible
Design Standards	Asian Curved Design	Modern European Touch
Anti static Electricity Grounding and discharge	Not Part of Original Design	Embedded and Implemented in Design
Programming and Pairing Manually to Lighting, Dimming, HVAC, and Music	Not Possible	Easy
Flexible Fascia changing (many varieties)	Difficult, Very Thick	Easy
All Other Standard Smart-BUS Advanced Automation Features	Included	Included

Q. If the customer wants to stop the shutter in the middle, how it can be done? Must use logic?
A. If you would like to add the function of stopping shutter, you don't need make the logic. You can do the programming as following:
Make one button on DDP as the function of stopping shutter:
Button Mode: Combination off,
Button configuration: suppose to you are using CH 1 & CH 2 as shutter, make ch1 & Ch2 both off

Q. How to Backup the Device
A. Go to Menu Backup, Device Backup